NAME
    Chouette - REST API Framework

DESCRIPTION
    Chouette is a framework for making asynchronous HTTP services. It makes
    some opinionated design choices, but is otherwise fairly flexible.

    AnyEvent is used as the glue to connect all the asynchronous libraries,
    although Chouette depends on Feersum and therefore EV for its event
    loop. It uses Feersum in PSGI mode so it can use Plack for request
    parsing, and has support for Plack::Middleware wrappers. Feersum is the
    least conservative choice in the stack but there aren't very many
    alternatives (Twiggy is a possibility but it is somewhat buggy and you
    need a hack to use unix sockets).

    Chouette generally assumes that its input will be
    "application/x-www-form-urlencoded". Plack::Request::WithEncoding is
    used so that text is properly decoded (we recommend UTF-8 of course).
    For output, the default is "application/json" encoded with JSON::XS.
    Both the input and output types can be modified, although this is only
    partially documented so far.

    Chouette apps can optionally load a config file and its format is
    "YAML", loaded with the YAML module. Regexp::Assemble is used for
    efficient route-dispatch.

    The above aside, Chouette's main purpose is to glue together several of
    my own modules into a cohesive whole. These modules have been designed
    to work together and I have used them to build numerous services, some
    of which handle a considerable amount of traffic and/or have very
    complicated requirements.

    Chouette was extracted from some of these services I have built before,
    and I have put in the extra effort required so that all the modules work
    together in the ways they were designed:

    AnyEvent::Task
        Allows us to perform blocking operations without holding up other
        requests.

    Callback::Frame
        Makes exception handling simple and convenient. You can "die"
        anywhere and it will only affect the request being currently
        handled.

        Important note: If you are using 3rd-party libraries that accept
        callbacks, please understand how Callback::Frame works. You will
        usually need to pass "fub {}" instead of "sub {}" to these
        libraries. See the EXCEPTIONS section for more details.

    Session::Token
        For random identifiers such as session tokens (obviously).

    Log::Defer
        Structured logging, properly integrated with AnyEvent::Task so your
        tasks can log messages into the proper request log contexts.

        Note that Chouette also depends on Log::Defer::Viz so
        "log-defer-viz" will be available for viewing logs.

    Log::File::Rolling
        Store logs in files and rotate them periodically. Also maintains a
        current symlink so you can simply run the following in a shell and
        you'll always see the latest logs as you need them:

            $ log-defer-viz -F /var/myapi/logs/myapi.current.log

    Chouette will always depend on AnyEvent::Task, Callback::Frame,
    Session::Token, and Log::Defer so if your app also uses these modules
    then it is sufficient to depend on "Chouette" alone.

    Where does the name "Chouette" come from? A chouette
    <http://www.bkgm.com/variants/Chouette.html> is a multi-player,
    fast-paced backgammon game with lots of stuff going on at once, kind of
    like an asynchronous REST API server... Hmmm, a bit of a stretch isn't
    it? To be honest it's just a cool name and I love backgammon, especially
    chouettes with friends and beer. :)

CHOUETTE OBJECT
    To start a server, create a "Chouette" object. The constructor accepts a
    hash ref with the following parameters. Most are optional. See the
    "bin/myapi" file below for a full example.

    "config_defaults"
        This hash is where you provide default config values. These values
        can be overridden by the config file.

        You can use the config store for values specific to your application
        (it is accessible with the "config" method of the context), but here
        are the values that "Chouette" itself looks for:

        "var_dir" - This directory must exist and be writable. "Chouette"
        will use this to store log files and AnyEvent::Task sockets.

        "listen" - This is the location the Chouette server will listen on.
        Examples: 8080 "127.0.0.1:8080" "unix:/var/myapi/myapi.socket"

        "logging.file_prefix" - The prefix for log file names (default is
        "app").

        "logging.timezone" - Either "gmtime" or "localtime" ("gmtime" is
        default, see Log::File::Rolling).

        The only required config parameters are "var_dir" and "listen"
        (though these can be omitted from the defaults assuming they will be
        specified in the config file, see below).

    "config_file"
        If you want a config file, this path is where it will be read from.
        The file's format is YAML. The values in this file over-ride the
        values in "config_defaults". If this parameter is not provided then
        it will not attempt to load a config file and defaults will be used.

    "routes"
        Routes are specified as a hash-ref of route paths, mapping to
        hash-refs of methods, mapping to package+function names or
        callbacks. For example:

            routes => {
                '/myapi/resource' => {
                    POST => 'MyAPI::Resource::create',
                    GET => 'MyAPI::Resource::get_all',
                },

                '/myapi/resource/:resource_id' => {
                    GET => 'MyAPI::Resource::get_by_id',
                    POST => sub {
                        my $c = shift;
                        die "400: can't update ID " . $c->route_params->{resource_id};
                    },
                },

                '/myapi/upload' => {
                    PUT => 'MyAPI::Upload::upload',
                }
            },

        For each route, if a package+function name is used it will try to
        "require" the package specified, and obtain the function specified
        for each HTTP method. If the package or function doesn't exists, an
        error will be thrown.

        You can use ":param" path elements in your routes to extract
        parameters from the path. They are accessible via the "route_params"
        method of the context (see "lib/MyAPI/Resource.pm" below).

        Note that routes are combined with Regexp::Assemble so we don't have
        to loop over every possible route for every request, in case you
        have a lot of routes. For example, here is the regexp used for the
        above routes:

            \A/myapi/(?:resource(?:/(?<resource_id>[^/]+)\z(?{2})|\z(?{1}))|upload\z(?{0}))

        See the "bin/myapi" file below for an example.

    "pre_route"
        A package+function or callback that will be called with a context
        and a resume callback. If the function determines the request
        processing should continue, it should call the resume callback.

        See the "lib/MyAPI/Auth.pm" file below for an example of the
        function.

    "middleware"
        Any array-ref of Plack::Middleware packages. Each element is either
        a string representing a package+function, or an array-ref where the
        first element is the package+function and the rest of the elements
        are the arguments to the middleware.

        The strings representing packages can either be prefixed with
        "Plack::Middleware::" or not. If not, it will try to "require" the
        package as is and if that doesn't exist, it will try again with the
        "Plack::Middleware::" prefix.

            middleware => [
                'Plack::Middleware::ContentLength',
                'ETag',
                ['Plack::Middleware::CrossOrigin', origins => '*'],
            ],

    "tasks"
        This is a hash-ref of AnyEvent::Task servers/clients to create.

            tasks => {
                db => {
                    pkg => 'LPAPI::Task::DB',
                    checkout_caching => 1,
                    client => {
                        timeout => 20,
                    },
                    server => {
                        hung_worker_timeout => 60,
                    },
                },
            },

        Route handlers can acquire checkouts by calling the "task" method on
        the context object.

        "checkout_caching" means that if a checkout is obtained and
        released, it will be cached for the duration of the request so if
        another checkout for this task is obtained, then the original will
        be returned. This is useful for "pre_route" handlers that use DBI
        for example, because we want the authenticate handler to run in the
        same transaction as the handler (for both correctness and efficiency
        reasons).

        Additional arguments to AnyEvent::Task::Client and
        <AnyEvent::Task::Server> can be passed in via "client" and "server".

        See the "bin/myapi", "lib/MyAPI/Task/PasswordHasher.pm", and
        "lib/MyAPI/Task/DB.pm" files for examples.

    "quiet"
        If set, suppress the start-up message which looks like so:

            ===============================================================================

            Chouette 0.100

            PID = 31713
            UID/GIDs = 1000/1000 4 20 24 27 30 46 113 129 1000
            Listening on: http://0.0.0.0:8080

            Follow log messages:
                log-defer-viz -F /var/myapi/logs/myapi.current.log

            ===============================================================================

    After the "Chouette" object is obtained, you should call "serve" or
    "run". They are basically the same except "serve" returns whereas "run"
    enters the AnyEvent event loop. These are equivalent:

        $chouette->run;

    and

        $chouette->serve;
        AE::cv->recv;

CONTEXT OBJECT
    For every request a "Chouette::Context" object is created. This object
    is passed into the handler for the request. Typically we name the object
    $c. Your code interacts with the request via the following methods on
    the context object:

    "respond"
        The respond method sends a JSON response, the contents of which are
        encoded from the first argument:

            $c->respond({ a => 1, b => 2, });

        Note: After responding, this method returns and your code continues.
        This is useful if you wish to do additional work after sending the
        response. However, if you call "respond" on this context again an
        error will logged. The second response will not be sent (it can't be
        since the connection is probably already closed).

        If you wish to stop processing after sending the response, you can
        "die" with the result from "respond" since it returns a special
        object for this purpose:

            die $c->respond({ a => 1, });

        See the EXCEPTIONS section for more details on the use of exceptions
        in Chouette.

        "respond" takes an optional second argument which is the HTTP
        response code (defaults to 200):

            $c->respond({ error => "access denied" }, 403);

        Note that processing continues here also. If you wish to terminate
        the processing right away, prefix with "die" as above, or use the
        following shortcut:

            die "403: access denied";

        The client will receive an HTTP response with the Feersum default
        message ("Forbidden" in this case) and the JSON body will be
        "{"error":"access denied"}".

        This works too, except the value of "error" in the JSON body of the
        response will just be "HTTP code 403":

            die 403;

    "done"
        If you wish to stop processing but not send a response:

            $c->done;

        You will need to send a response later, usually from an async
        callback. Note: If the last reference to the context is destroyed
        without a response being sent, the message "no response was sent,
        sending 500" will be logged and a 500 "internal server error"
        response will be sent.

        You don't ever need to call "done". You can just "return" from the
        handler instead. "done" is only for convenience in case you are
        deeply nested in callbacks and don't want to worry about writing a
        bunch of nested returns.

    "respond_raw"
        Similar to "respond" except it doesn't assume JSON encoding:

            $c->respond_raw(200, 'text/plain', 'here is some plain text');

    "logger"
        Returns the Log::Defer object associated with the request:

            $c->logger->info("some stuff is happening");

            {
                my $timer = $c->logger->timer('doing big_computation');
                big_computation();
            }

        See the Log::Defer docs for more details. For viewing the log
        messages, check out Log::Defer::Viz.

    "config"
        Returns the "config" hash. See the "CHOUETTE OBJECT" section for
        details.

    "req"
        Returns the Plack::Request object created for this request.

            my $name = $c->req->parameters->{name};

    "res"
        One would think this would return a Plack::Response object.
        Unfortunately this isn't yet implemented and will instead throw an
        error.

    "generate_token"
        Generates a random string using a default-config Session::Token
        generator. The generator is created when the first token is needed
        so as to avoid a "cold" entropy pool immediately after a reboot (see
        the Session::Token docs).

    "task"
        Returns an AnyEvent::Task checkout object for the task with the
        given name:

            $c->task('db')->selectrow_hashref(q{ SELECT * FROM sometable WHERE id = ? },
                                              undef, $id, sub {
                my ($dbh, $row) = @_;

                die $c->respond($row);
            });

        Checkout options can be passed after the task name:

            $c->task('db', timeout => 5)->selectrow_hashref(...);

        See AnyEvent::Task for more details.

EXCEPTIONS
    Assuming you are familiar with asynchronous programming, most of
    Chouette should feel straightforward. The only thing that might be
    unfamiliar is how exceptions are used.

  ERROR HANDLING
    The first unusual thing about how Chouette uses exceptions is that it
    uses them for error conditions, in contrast to many other asynchronous
    frameworks.

    Most asynchronous frameworks are unable to use exceptions to signal
    errors since an error may occur in a callback being run from the event
    loop. If this callback throws an exception, there will be nothing to
    catch it, except perhaps a catch block installed by the event loop. Even
    if the event loop does catch it, it won't know which connection the
    exception is for, and therefore won't be able to send a 500 error to
    that connection or add a message to that connection's log.

    Consider the AnyEvent::DBI library. This is how its error handling
    works:

        $dbh->exec("SELECT * FROM no_such_table", sub {
            my ($dbh, $rows, $rv) = @_;

            if ($#_) {
                # success
            } else {
                # failure. error message is in $@
            }
        });

    Even if "exec" failed, the callback still gets called. Whether or not it
    succeeded is indicated by its parameters. You can think of this as a
    sort of "in-band" signalling. The fact that there was an error, and what
    exactly that error was, needs to be indicated by the callback's
    parameters in some way. Unfortunately every library does this slightly
    differently. Another alternative used by some libraries is to accept 2
    callbacks, one of which is called in the success case, and the other in
    the failure case.

    But with both of these methods, what should the callback do when it is
    notified of an error? It can't just "die" because nothing will catch the
    exception. With the EV event loop you will see this:

        EV: error in callback (ignoring): failure: ERROR:  relation "no_such_table" does not exist

    Even if you wrap an "eval" or a Try::Tiny "try {} catch {}" around the
    code the same thing happens. The try/catch is in effect while installing
    the callback, but not when the callback is called.

    As a consequence of all this, asynchronous web frameworks usually cannot
    indicate errors with exceptions. Instead, they require you to respond to
    the client from inside the callback:

        $dbh->exec("SELECT * FROM no_such_table", sub {
            my ($dbh, $rows, $rv) = @_;

            if (!$#_) {
                $context->respond_500_error("DB error: $@");
                return;
            }

            # success
        });

    There are several down-sides to this approach:

    *   The error must be handled locally in each callback, rather than once
        in a catch-all error handler.

    *   Everywhere an error might occur needs to have access to the context
        object. This often requires passing it as an argument around
        everywhere.

    *   You might forget to handle an error (or it might be too inconvenient
        so you don't bother) and your success-case code will run on garbage
        data.

    *   Perhaps most importantly, if some unexpected exception is thrown by
        your callback (or something that it calls) then the event loop will
        receive an exception and nothing will get logged or replied to.

    For these reasons, Chouette uses Callback::Frame to deal with
    exceptions. The idea is that the exception handling code is carried
    around with your callbacks. For instance, this is how you would
    accomplish the same thing with Chouette:

        my $dbh = $c->task('db');

        $dbh->selectrow_arrayref("SELECT * FROM no_such_table", undef, sub {
            my ($dbh, $rows) = @_;

            # success

            # Even if I can die here and it will get routed to the right request!
        });

    The callback will only be invoked in the success case. If a failure
    occurs, an exception will be raised in the dynamic scope that was in
    effect when the callback was installed. Because Chouette installs a
    "catch" handler for each request, an appropriate error will be sent to
    the client and added to the Chouette logs.

    Important note: Libraries like AnyEvent::Task (which is what "task" in
    the above example uses) are Callback::Frame-aware. This means that you
    can pass "sub {}" callbacks into them and they will automatically
    convert them to "fub {}" callbacks for you.

    When using 3rd-party libraries, you must pass "fub {}" instead. Also,
    you'll need to figure out how the library handles error cases, and throw
    exceptions as appropriate. For example, if you really wanted to use
    AnyEvent::DBI (even though the AnyEvent::Task version is superior in
    pretty much every way) this is what you would do:

        $dbh->exec("SELECT * FROM no_such_table", fub {
            my ($dbh, $rows, $rv) = @_;

            if (!$#_) {
                die "DB error: $@";
            }

            # success
        });

    Note that the "sub" has been changed to "fub" and an exception is thrown
    for the error case.

    In summary, when installing callbacks you must use "fub" except when the
    library is Callback::Frame-aware.

    Please see the Callback::Frame documentation for more specifics.

  CONTROL FLOW
    The other unusual thing about how Chouette uses exceptions is that it
    uses them for control flow as well as errors.

    As you can see in the "respond" method documentation of the "CHOUETTE
    OBJECT" section, you can "die" with the result of the "respond" method:

        die $c->respond({ status => 'ok' });

    This works because "respond" returns a special object specifically
    intended for this purpose. When it gets an exception, the main catch
    block checks if it is this object. If so, it just ignores the exception.
    This lets you terminate your current callback without worrying about
    "return"ing.

    This catch block also checks if your exception starts with 3 digits
    followed by a word-break. If so, it considers this a special exception
    intended to send an HTTP response. For example, the following code will
    send a 404 Not Found response:

        die "404: no such resource";

    The body of the response will be:

        {"error":"no such resource"}

    You can even just throw a number:

        die 404;

    Some people consider this usage of exceptions to be kind of a hack, but
    it does make for really nice code if you'll give it a chance.

EXAMPLE
    These files represent a complete-ish Chouette application that I have
    extracted from a real-world app. Warning: untested!

    "bin/myapi"
            #!/usr/bin/env perl

            use common::sense;

            use Chouette;

            my $chouette = Chouette->new({
                config_file => '/etc/myapi.conf',

                config_defaults => {
                    var_dir => '/var/myapi',
                    listen => '8080',

                    logging => {
                        file_prefix => 'myapi',
                        timezone => 'localtime',
                    },
                },

                middleware => [
                    'Plack::Middleware::ContentLength',
                ],

                pre_route => 'MyAPI::Auth::authenticate',

                routes => {
                    '/myapi/unauth/login' => {
                        POST => 'MyAPI::User::login',
                    },

                    '/myapi/resource' => {
                        POST => 'MyAPI::Resource::create',
                        GET => 'MyAPI::Resource::get_all',
                    },

                    '/myapi/resource/:resource_id' => {
                        GET => 'MyAPI::Resource::get_by_id',
                    },
                },

                tasks => {
                    passwd => {
                        pkg => 'MyAPI::Task::PasswordHasher',
                    },
                    db => {
                        pkg => 'MyAPI::Task::DB',
                        checkout_caching => 1, ## so same dbh is used in authenticate and handler
                    },
                },
            });

            $chouette->run;

    "lib/MyAPI/Auth.pm"
            package MyAPI::Auth;

            use common::sense;

            sub authenticate {
                my ($c, $cb) = @_;

                if ($c->{env}->{PATH_INFO} =~ m{^/myapi/unauth/}) {
                    return $cb->();
                }

                my $session = $c->req->parameters->{session};

                $c->task('db')->selectrow_hashref(q{ SELECT user_id FROM session WHERE session_token = ? },
                                                  undef, $session, sub {
                    my ($dbh, $row) = @_;

                    die 403 if !$row;

                    $c->{user_id} = $row->{user_id};

                    $cb->();
                });
            }

            1;

    "lib/MyAPI/User.pm"
            package MyAPI::User;

            use common::sense;

            sub login {
                my $c = shift;

                my $username = $c->req->parameters->{username};
                my $password = $c->req->parameters->{password};

                $c->task('db')->selectrow_hashref(q{ SELECT user_id, password_hashed FROM myuser WHERE username = ? }, undef, $username, sub {
                    my ($dbh, $row) = @_;

                    die 403 if !$row;

                    $c->task('passwd')->verify_password($row->{password_hashed}, $password, sub {
                        die 403 if !$_[1];

                        my $session_token = $c->generate_token();

                        $dbh->do(q{ INSERT INTO session (session_token, user_id) VALUES (?, ?) },
                                 undef, $session_token, $row->{user_id}, sub {

                            $dbh->commit(sub {
                                die $c->respond({ sess => $session_token });
                            });
                        });
                    });
                });
            }

            1;

    "lib/MyAPI/Resource.pm"
            package MyAPI::Resource;

            use common::sense;

            sub create {
                my $c = shift;
                die "500 not implemented";
            }

            sub get_all {
                $c->logger->warn("denying access to get_all");
                die 403;
            }

            sub get_by_id {
                my $c = shift;
                my $resource_id = $c->route_params->{resource_id};
                die $c->respond({ resource_id => $resource_id, });
            }

            1;

    "lib/MyAPI/Task/PasswordHasher.pm"
            package MyAPI::Task::PasswordHasher;

            use common::sense;

            use Authen::Passphrase::BlowfishCrypt;
            use Encode;


            sub new {
                my ($class, %args) = @_;

                my $self = {};
                bless $self, $class;

                open($self->{dev_urandom}, '<:raw', '/dev/urandom') || die "open urandom: $!";

                setpriority(0, $$, 19); ## renice our process so we don't hold up more important processes

                return $self;
            }

            sub hash_password {
                my ($self, $plaintext_passwd) = @_;

                read($self->{dev_urandom}, my $salt, 16) == 16 || die "bad read from urandom";

                return Authen::Passphrase::BlowfishCrypt->new(cost => 10,
                                                              salt => $salt,
                                                              passphrase => encode_utf8($plaintext_passwd // ''))
                                                        ->as_crypt;

            }

            sub verify_password {
                my ($self, $crypted_passwd, $plaintext_passwd) = @_;

                return Authen::Passphrase::BlowfishCrypt->from_crypt($crypted_passwd // '')
                                                        ->match(encode_utf8($plaintext_passwd // ''));
            }

            1;

    "lib/MyAPI/Task/DB.pm"
            package MyAPI::Task::DB;

            use common::sense;

            use AnyEvent::Task::Logger;

            use DBI;


            sub new {
                my $config = shift;

                my $dbh = DBI->connect("dbi:Pg:dbname=myapi", '', '', {AutoCommit => 0, RaiseError => 1, PrintError => 0, })
                    || die "couldn't connect to db";

                return $dbh;
            }


            sub CHECKOUT_DONE {
                my ($dbh) = @_;

                $dbh->rollback;
            }

            1;

SEE ALSO
    More documentation can be found in the modules linked in the DESCRIPTION
    section.

    Chouette github repo <https://github.com/hoytech/Chouette>

AUTHOR
    Doug Hoyte, "<doug@hcsw.org>"

COPYRIGHT & LICENSE
    Copyright 2017 Doug Hoyte.

    This module is licensed under the same terms as perl itself.