Network Working Group

Internet Engineering Task Force (IETF)                         J. Uberti
Request for Comments: 8854                                        Google
Intended status:
Category: Standards Track                            Jul 16, 2019
Expires: January 17,                                       May 2020
ISSN: 2070-1721

              WebRTC Forward Error Correction Requirements


   This document provides information and requirements for how the use of
   Forward Error Correction (FEC) should be used by WebRTC implementations.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents an Internet Standards Track document.

   This document is a product of the Internet Engineering Task Force
   (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list  It represents the consensus of current Internet-
   Drafts is at

   Internet-Drafts are draft documents valid the IETF community.  It has
   received public review and has been approved for a maximum publication by the
   Internet Engineering Steering Group (IESG).  Further information on
   Internet Standards is available in Section 2 of six months RFC 7841.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be updated, replaced, or obsoleted by other documents obtained at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on January 17, 2020.

Copyright Notice

   Copyright (c) 2019 2020 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   ( in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   2
   2.  Terminology . . . . . . . . . . . . . . . . . . . . . . . . .   2
   3.  Types of FEC  . . . . . . . . . . . . . . . . . . . . . . . .   2
     3.1.  Separate FEC Stream . . . . . . . . . . . . . . . . . . .   3
     3.2.  Redundant Encoding  . . . . . . . . . . . . . . . . . . .   3
     3.3.  Codec-Specific In-band In-Band FEC  . . . . . . . . . . . . . . .   3
   4.  FEC for Audio Content . . . . . . . . . . . . . . . . . . . .   4
     4.1.  Recommended Mechanism . . . . . . . . . . . . . . . . . .   4
     4.2.  Negotiating Support . . . . . . . . . . . . . . . . . . .   5
   5.  FEC for Video Content . . . . . . . . . . . . . . . . . . . .   5
     5.1.  Recommended Mechanism . . . . . . . . . . . . . . . . . .   5
     5.2.  Negotiating Support . . . . . . . . . . . . . . . . . . .   6
   6.  FEC for Application Content . . . . . . . . . . . . . . . . .   6
   7.  Implementation Requirements . . . . . . . . . . . . . . . . .   7
   8.  Adaptive Use of FEC . . . . . . . . . . . . . . . . . . . . .   7
   9.  Security Considerations . . . . . . . . . . . . . . . . . . .   8
   10. IANA Considerations . . . . . . . . . . . . . . . . . . . . .   8
   11. Acknowledgements  . . . . . . . . . . . . . . . . . . . . . .   8
   12. References  . . . . . . . . . . . . . . . . . . . . . . . . .   8
     11.1.  Normative References . . . . . . . . . . . . . . . . . .   8
     11.2.  Informative References . . . . . . . . . . . . . . . . .   9
   Appendix A.  Change log . . . . . . . . . . . . . . . . . . . . .  11
   Author's Address  . . . . . . . . . . . . . . . . . . . . . . . .  13

1.  Introduction

   In situations where packet loss is high, or perfect media quality is
   essential, Forward Error Correction (FEC) can be used to proactively
   recover from packet losses.  This specification provides guidance on
   which FEC mechanisms to use, and how to use them, for WebRTC

2.  Terminology

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "OPTIONAL" in this document are to be interpreted as described in
   BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all
   capitals, as shown here.

3.  Types of FEC

   FEC describes the sending of redundant information in an outgoing
   packet stream so that information can still be recovered even in the
   event of packet loss.  There are multiple ways this can be
   accomplished for RTP media streams [RFC3550]; this section enumerates
   the various mechanisms available and describes their tradeoffs. trade-offs.

3.1.  Separate FEC Stream

   This approach, as described in [RFC5956], Section 4.3, sends FEC
   packets as an independent RTP stream with its own synchronization
   source (SSRC, [RFC3550]) (SSRC) [RFC3550] and payload type, multiplexed with the
   primary encoding.  While this approach can protect multiple packets
   of the primary encoding with a single FEC packet, each FEC packet
   will have its own IP+UDP+RTP+FEC IP/UDP/RTP/FEC header, and this overhead can be
   excessive in some cases, e.g., when protecting each primary packet
   with a FEC packet.

   This approach allows for recovery of entire RTP packets, including
   the full RTP header.

3.2.  Redundant Encoding

   This approach, as described in [RFC2198], allows for redundant data
   to be piggybacked on an existing primary encoding, all in a single
   packet.  This redundant data may be an exact copy of a previous
   payload, or for codecs that support variable-bitrate encodings, the
   redundant data may possibly be a smaller, lower-quality
   representation.  In certain cases, the redundant data could include
   encodings of multiple prior audio frames.

   Since there is only a single set of packet headers, this approach
   allows for a very efficient representation of primary + and redundant
   data.  However, this savings is only realized when the data all fits
   into a single packet (i.e. the size is less than a MTU).  As a
   result, this approach is generally not useful for video content.

   As described in [RFC2198], Section 4, this approach cannot recover
   certain parts of the RTP header, including the marker bit, CSRC
   contributing source (CSRC) information, and header extensions.

3.3.  Codec-Specific In-band In-Band FEC

   Some audio codecs, notably Opus [RFC6716] and AMR Adaptive Multi-Rate
   (AMR) [RFC4867], support their own in-band FEC mechanism, where
   redundant data is included in the codec payload.  This is similar to
   the redundant encoding mechanism described above, but as it adds no
   additional framing, it can be slightly more efficient.

   For Opus, audio frames deemed important are re-encoded at a lower
   bitrate and appended to the next payload, allowing partial recovery
   of a lost packet.  This scheme is fairly efficient; experiments
   performed indicate that when Opus FEC is used, the overhead imposed
   is only about 20-30%, depending on the amount of protection needed.
   Note that this mechanism can only carry redundancy information for
   the immediately preceding audio frame; as such thus the decoder cannot fully
   recover multiple consecutive lost packets, which can be a problem on
   wireless networks.  See [RFC6716], Section 2.1.7, and this Opus
   mailing list post [OpusFEC] for more details.

   For AMR/AMR-WB, AMR and AMR-Wideband (AMR-WB), packets can contain copies or
   lower-quality encodings of multiple prior audio frames.  See
   [RFC4867], Section 3.7.1 3.7.1, for details on this mechanism.

   In-band FEC mechanisms cannot recover any of the RTP header.

4.  FEC for Audio Content

   The following section provides guidance on how to best use FEC for
   transmitting audio data.  As indicated in Section 8 below, FEC should
   only be activated if network conditions warrant it, or upon explicit
   application request.

4.1.  Recommended Mechanism

   When using variable-bitrate codecs without an internal FEC, redundant
   encoding (as described in Section 3.2) with lower-fidelity version(s)
   of the previous packet(s) is RECOMMENDED.  This provides reasonable
   protection of the payload with only moderate bitrate increase, as the
   redundant encodings can be significantly smaller than the primary

   When using the Opus codec, use of the built-in Opus FEC mechanism is
   RECOMMENDED.  This provides reasonable protection of the audio stream
   against individual losses, with minimal overhead.  Note that, as
   indicated above, the built-in Opus FEC only provides single-frame
   redundancy; if multi-packet protection is needed, the aforementioned
   redundant encoding with reduced-bitrate Opus encodings SHOULD be used

   When using the AMR/AMR-WB codecs, use of their built-in FEC mechanism
   is RECOMMENDED.  This provides slightly more efficient protection of
   the audio stream than redundant encoding. encoding does.

   When using constant-bitrate codecs, e.g., PCMU [RFC5391], redundant
   encoding MAY be used, but this will result in a potentially
   significant bitrate increase, and suddenly increasing bitrate to deal
   with losses from congestion may actually make things worse.

   Because of the lower packet rate of audio encodings, usually a single
   packet per frame, use of a separate FEC stream comes with a higher
   overhead than other mechanisms, and therefore is NOT RECOMMENDED.

   As mentioned above, the recommended mechanisms do not allow recovery
   of parts of the RTP header that may be important in certain audio
   applications, e.g., CSRCs and RTP header extensions like those
   specified in [RFC6464] and [RFC6465].  Implementations SHOULD account
   for this and attempt to approximate this information, using an
   approach similar to those described in [RFC2198], Section 4, and
   [RFC6464], Section 5.

4.2.  Negotiating Support

   Support for redundant encoding of a given RTP stream SHOULD be
   indicated by including audio/red [RFC2198] as an additional supported
   media type for the associated m= "m=" section in the SDP offer
   [RFC3264].  Answerers can reject the use of redundant encoding by not
   including the audio/red media type in the corresponding m= "m=" section
   in the SDP answer.

   Support for codec-specific FEC mechanisms are typically indicated via
   "a=fmtp" parameters.

   For Opus, a receiver MUST indicate that it is prepared to use
   incoming FEC data with the "useinbandfec=1" parameter, as specified
   in [RFC7587].  This parameter is declarative and can be negotiated
   separately for either media direction.

   For AMR/AMR-WB, support for redundant encoding, and the maximum
   supported depth, are controlled by the 'max-red' "max-red" parameter, as
   specified in [RFC4867], Section 8.1.  Receivers MUST include this
   parameter, and set it to an appropriate value, as specified in
   [TS.26114], Table 6.3.

5.  FEC for Video Content

   The following section provides guidance on how to best use FEC for
   transmitting video data.  As indicated in Section 8 below, FEC should
   only be activated if network conditions warrant it, or upon explicit
   application request.

5.1.  Recommended Mechanism

   Video frames, due to their size, often require multiple RTP packets.
   As discussed above, a separate FEC stream can protect multiple
   packets with a single FEC packet.  In addition, the "flexfec" Flexible FEC
   mechanism described in [I-D.ietf-payload-flexible-fec-scheme] [RFC8627] is also capable of protecting
   multiple RTP streams via a single FEC stream, including all the
   streams that are part of a BUNDLE
   [I-D.ietf-mmusic-sdp-bundle-negotiation] group. group [RFC8843].  As a result, for
   video content, use of a separate FEC stream with the flexfec Flexible FEC RTP
   payload format is RECOMMENDED.

   To process the incoming FEC stream, the receiver can demultiplex it
   by SSRC, and then correlate it with the appropriate primary stream(s)
   via the CSRC(s) present in the RTP header of flexfec Flexible FEC repair
   packets, or the SSRC field present in the FEC header of flexfec Flexible FEC
   retransmission packets.

5.2.  Negotiating Support

   Support for a an SSRC-multiplexed flexfec Flexible FEC stream to protect a
   given RTP stream SHOULD be indicated by including one of the formats described video/flexfec
   (described in [I-D.ietf-payload-flexible-fec-scheme], [RFC8627], Section 5.1.2, 5.1.2) as an additional supported
   media type for the associated m= "m=" section in the SDP offer
   [RFC3264].  As mentioned above, when BUNDLE is used, only a single flexfec
   Flexible FEC repair stream will be created for each BUNDLE group,
   even if flexfec Flexible FEC is negotiated for each primary stream.

   Answerers can reject the use of SSRC-multiplexed FEC, FEC by not including
   the offered FEC formats video/flexfec media type in the corresponding m= "m=" section in the
   SDP answer.

   Use of FEC-only m-lines, "m=" lines, and grouping using the SDP group
   mechanism as described in [RFC5956], Section 4.1 4.1, is not currently
   defined for WebRTC, and SHOULD NOT be offered.

   Answerers SHOULD reject any FEC-only m-lines, "m=" lines, unless they
   specifically know how to handle such a thing in a WebRTC context
   (perhaps defined by a future version of the WebRTC specifications).

6.  FEC for Application Content

   WebRTC also supports the ability to send generic application data,
   and provides transport-level retransmission mechanisms to support
   full and partial (e.g. (e.g., timed) reliability.  See
   [I-D.ietf-rtcweb-data-channel] [RFC8831] for

   Because the application can control exactly what data to send, it has
   the ability to monitor packet statistics and perform its own
   application-level FEC, FEC if necessary.

   As a result, this document makes no recommendations regarding FEC for
   the underlying data transport.

7.  Implementation Requirements

   To support the functionality recommended above, implementations MUST
   be able to receive and make use of the relevant FEC formats for their
   supported audio codecs, and MUST indicate this support, as described
   in Section 4.  Use of these formats when sending, as mentioned above,

   The general FEC mechanism described in
   [I-D.ietf-payload-flexible-fec-scheme] [RFC8627] SHOULD also be
   supported, as mentioned in Section 5.

   Implementations MAY support additional FEC mechanisms if desired,
   e.g., [RFC5109].

8.  Adaptive Use of FEC

   Because use of FEC always causes redundant data to be transmitted,
   and the total amount of data must remain within any bandwidth limits
   indicated by congestion control and the receiver, this will lead to
   less bandwidth available for the primary encoding, even when the
   redundant data is not being used.  This is in contrast to methods
   like RTX [RFC4588] or flexfec's Flexible FEC's retransmission mode (
   [I-D.ietf-payload-flexible-fec-scheme], ([RFC8627],
   Section 1.1.7), which only transmit redundant data when necessary, at
   the cost of an extra
   roundtrip round trip and thereby increased media latency.

   Given this, WebRTC implementations SHOULD prefer using RTX or flexfec
   Flexible FEC retransmissions instead of FEC when the connection RTT
   is within the application's latency budget, and otherwise SHOULD only
   transmit the amount of FEC needed to protect against the observed
   packet loss (which can be determined, e.g., by monitoring transmit
   packet loss data from RTCP Receiver Reports RTP Control Protocol (RTCP) receiver reports
   [RFC3550]), unless the application indicates it is willing to pay a
   quality penalty to proactively avoid losses.

   Note that when probing bandwidth, i.e., speculatively sending extra
   data to determine if additional link capacity exists, FEC data SHOULD
   be used as the additional data.  Given that extra data is going to be
   sent regardless, it makes sense to have that data protect the primary
   payload; in addition, FEC can typically be applied in a way that
   increases bandwidth only modestly, which is necessary when probing.

   When using FEC with layered codecs, e.g., [RFC6386], where only base
   layer frames are critical to the decoding of future frames,
   implementations SHOULD only apply FEC to these base layer frames.

   Finally, it should be noted that that, although applying redundancy is
   often useful in protecting a stream against packet loss, if the loss
   is caused by network congestion, the additional bandwidth used by the
   redundant data may actually make the situation worse, worse and can lead to
   significant degradation of the network.

9.  Security Considerations

   In the WebRTC context, FEC is specifically concerned with recovering
   data from lost packets; any corrupted packets will be discarded by
   the SRTP Secure Real-Time Transport Protocol (SRTP) [RFC3711] decryption
   process.  Therefore, as described in [RFC3711], Section 10, the
   default processing when using FEC with SRTP is to perform FEC
   followed by SRTP at the sender, and SRTP followed by FEC at the
   receiver.  This ordering is used for all the SRTP Protection Profiles protection profiles
   used in DTLS-SRTP [RFC5763], which are enumerated in [RFC5764],
   Section 4.1.2.

   Additional security considerations for each individual FEC mechanism
   are enumerated in their respective documents.

10.  IANA Considerations

   This document requires no actions from IANA.

11.  Acknowledgements

   Several people provided significant input into this document,
   including Bernard Aboba, Jonathan Lennox, Giri Mandyam, Varun Singh,
   Tim Terriberry, Magnus Westerlund, and Mo Zanaty.

12.  References


11.1.  Normative References

              Zanaty, M., Singh, V., Begen, A., and G. Mandyam, "RTP
              Payload Format for Flexible Forward Error Correction
              (FEC)", draft-ietf-payload-flexible-fec-scheme-20 (work in
              progress), May 2019.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,

   [RFC2198]  Perkins, C., Kouvelas, I., Hodson, O., Hardman, V.,
              Handley, M., Bolot, J., J.C., Vega-Garcia, A., and S. Fosse-
              Parisis, "RTP Payload for Redundant Audio Data", RFC 2198,
              DOI 10.17487/RFC2198, September 1997,

   [RFC3264]  Rosenberg, J. and H. Schulzrinne, "An Offer/Answer Model
              with Session Description Protocol (SDP)", RFC 3264,
              DOI 10.17487/RFC3264, June 2002,

   [RFC4867]  Sjoberg, J., Westerlund, M., Lakaniemi, A., and Q. Xie,
              "RTP Payload Format and File Storage Format for the
              Adaptive Multi-Rate (AMR) and Adaptive Multi-Rate Wideband
              (AMR-WB) Audio Codecs", RFC 4867, DOI 10.17487/RFC4867,
              April 2007, <>.

   [RFC5956]  Begen, A., "Forward Error Correction Grouping Semantics in
              the Session Description Protocol", RFC 5956,
              DOI 10.17487/RFC5956, September 2010,

   [RFC7587]  Spittka, J., Vos, K., and JM. Valin, "RTP Payload Format
              for the Opus Speech and Audio Codec", RFC 7587,
              DOI 10.17487/RFC7587, June 2015,

   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <>.

   [RFC8627]  Zanaty, M., Singh, V., Begen, A., and G. Mandyam, "RTP
              Payload Format for Flexible Forward Error Correction
              (FEC)", RFC 8627, DOI 10.17487/RFC8627, July 2019,

   [TS.26114] 3GPP, "IP Multimedia Subsystem (IMS); Multimedia
              telephony; Media handling and interaction", 3GPP TS 26.114
              15.0.0, 22 September 2017.

12.2. 2017,

11.2.  Informative References

              Holmberg, C., Alvestrand, H., and C. Jennings,
              "Negotiating Media Multiplexing Using the Session
              Description Protocol (SDP)", draft-ietf-mmusic-sdp-bundle-
              negotiation-54 (work in progress), December 2018.

              Jesup, R., Loreto, S., and M. Tuexen, "WebRTC Data
              Channels", draft-ietf-rtcweb-data-channel-13 (work in
              progress), January 2015.

   [OpusFEC]  Terriberry, T., "Opus "Subject: Opus FEC", message to the opus
              mailing list, 28 January 2013. 2013,

   [RFC3550]  Schulzrinne, H., Casner, S., Frederick, R., and V.
              Jacobson, "RTP: A Transport Protocol for Real-Time
              Applications", STD 64, RFC 3550, DOI 10.17487/RFC3550,
              July 2003, <>.

   [RFC3711]  Baugher, M., McGrew, D., Naslund, M., Carrara, E., and K.
              Norrman, "The Secure Real-time Transport Protocol (SRTP)",
              RFC 3711, DOI 10.17487/RFC3711, March 2004,

   [RFC4588]  Rey, J., Leon, D., Miyazaki, A., Varsa, V., and R.
              Hakenberg, "RTP Retransmission Payload Format", RFC 4588,
              DOI 10.17487/RFC4588, July 2006,

   [RFC5109]  Li, A., Ed., "RTP Payload Format for Generic Forward Error
              Correction", RFC 5109, DOI 10.17487/RFC5109, December
              2007, <>.

   [RFC5391]  Sollaud, A., "RTP Payload Format for ITU-T Recommendation
              G.711.1", RFC 5391, DOI 10.17487/RFC5391, November 2008,

   [RFC5763]  Fischl, J., Tschofenig, H., and E. Rescorla, "Framework
              for Establishing a Secure Real-time Transport Protocol
              (SRTP) Security Context Using Datagram Transport Layer
              Security (DTLS)", RFC 5763, DOI 10.17487/RFC5763, May
              2010, <>.

   [RFC5764]  McGrew, D. and E. Rescorla, "Datagram Transport Layer
              Security (DTLS) Extension to Establish Keys for the Secure
              Real-time Transport Protocol (SRTP)", RFC 5764,
              DOI 10.17487/RFC5764, May 2010,

   [RFC6386]  Bankoski, J., Koleszar, J., Quillio, L., Salonen, J.,
              Wilkins, P., and Y. Xu, "VP8 Data Format and Decoding
              Guide", RFC 6386, DOI 10.17487/RFC6386, November 2011,

   [RFC6464]  Lennox, J., Ed., Ivov, E., and E. Marocco, "A Real-time
              Transport Protocol (RTP) Header Extension for Client-to-
              Mixer Audio Level Indication", RFC 6464,
              DOI 10.17487/RFC6464, December 2011,

   [RFC6465]  Ivov, E., Ed., Marocco, E., Ed., and J. Lennox, "A Real-
              time Transport Protocol (RTP) Header Extension for Mixer-
              to-Client Audio Level Indication", RFC 6465,
              DOI 10.17487/RFC6465, December 2011,

   [RFC6716]  Valin, JM., Vos, K., and T. Terriberry, "Definition of the
              Opus Audio Codec", RFC 6716, DOI 10.17487/RFC6716,
              September 2012, <>.

Appendix A.  Change log

   Changes in draft -10:

   o  Additional editorial changes from IETF LC.

   Changes in draft -09:

   o  Editorial changes from IETF LC.

   o  Added new reference for Opus FEC.

   Changes in draft -08:

   o  Switch to RFC 8174 boilerplate.

   Changes in draft -07:

   o  Clarify how bandwidth management interacts with FEC.

   o  Make 3GPP reference normative.

   Changes in draft -06:

   o  Discuss how multiple streams can be protected by a single FlexFEC

   o  Discuss FEC for bandwidth probing.

   o  Add note about recovery of RTP headers and header extensions.

   o  Add note about FEC/SRTP ordering.

   o  Clarify flexfec demux text, and mention retransmits.

   o  Clarify text regarding offers/answers.

   o  Make RFC2198 support SHOULD strength.

   o  Clean up references.

   Changes in draft -05:

   o  No changes.

   Changes in draft -04:

   o  Discussion of layered codecs.

   o  Discussion of RTX.

   o  Clarified implementation requirements.

   o  FlexFEC MUST -> SHOULD.

   o  Clarified AMR max-red handling.

   o  Updated references.

   Changes in draft -03:

   o  Added overhead stats for Opus.

   o  Expanded discussion of multi-packet FEC for Opus.

   o  Added discussion of AMR/AMR-WB.

   o  Removed discussion of ssrc-group.

   o  Referenced the data channel doc.

   o  Referenced the RTP/RTCP RFC.

   o  Several small edits based on feedback from Magnus.

   Changes in draft -02:

   o  Expanded discussion of FEC-only m-lines,

   [RFC8831]  Jesup, R., Loreto, S., and how they should be
      handled in offers M. Tuexen, "WebRTC Data
              Channels", RFC 8831, DOI 10.17487/RFC8831, April 2020,

   [RFC8843]  Holmberg, C., Alvestrand, H., and answers.

   Changes in draft -01:

   o  Tweaked abstract/intro text that was ambiguously normative.

   o  Removed text on FEC for Opus in CELT mode.

   o  Changed C. Jennings,
              "Negotiating Media Multiplexing Using the Session
              Description Protocol (SDP)", RFC 2198 recommendation for PCMU to be MAY instead of NOT
      RECOMMENDED, based on list feedback.

   o  Explicitly called out application data as something not addressed
      in 8843,
              DOI 10.17487/RFC8843, April 2020,


   Several people provided significant input into this document.

   o  Updated flexible-fec reference.

   Changes in draft -00:

   o  Initial version, from sidebar conversation at IETF 90. document,
   including Bernard Aboba, Jonathan Lennox, Giri Mandyam, Varun Singh,
   Tim Terriberry, Magnus Westerlund, and Mo Zanaty.

Author's Address

   Justin Uberti
   747 6th St S
   Kirkland, WA 98033
   United States of America